CUSTOM ENGINE BUILD

  • Sale
  • Regular price $11,025.00


1-Strip/Prep Block for Cleaning- $47.50                                 

1-Bake Block and Acid Dip- $95.00

1-Cylinder Bore and Hone- $297.50

1-Cam Bearings, Install Prep- $95.00

1-Pin Fit and Assemble Rods and Pistons- $95.00

1-Final Wash Block- $47.50

1-Install Freeze Plugs and Galley Plugs- $47.50

1-Index Grind Crankshaft- 215.00

1-Surface-Deck Block- $185.00

1-Rod and Main Bearing Checks- $95.00

3-Magnaflux Block or Head (ea)- $210.00

1-Balance Rotating Assembly-$275.00

1-Deburr Block Drain Back Opening in Valley- $47.50

1-Drill Drain Back Hole in Block at rear of Valley- $47.50

1-Wash Used Parts from Core Engine- Assemble to Turn Key Status- Degree Camshaft- Set Lifter Preload- $950.00

1-Break-In. Includes Fluids, Cam Break-In, Initial Tuning, Fluid Drain- $400.00

1-Crankshaft Main Bearing Set-.020- $139.95

1-Rod Bearing Set (8 Pairs Per Motor)- .020- $89.95

1-Bearings, Camshaft-Full Set- $39.95

1-Dipstick Tube-Rear Sump Pan- 34.95

1-Freeze Plugs, Brass- $19.95

1-Cast Pistons, Set of 8-.060 Oversize- 500 for 76cc Head- 9.3 to 1- $479.95

1-Moly Piston Rings- .060 Oversize- 472/500- $99.95

1-Engine Gasket Set- 472/500- $129.95

1-Bolt Set, Billet Flexplate or Flywheel. Longer than Stock. For Use With Our Part DT01 or DT02- $18.95

1-Head Bolt Kit 2,10,8- $129.95

1-RWD Rebuilt Starter- $99.95

1-Street-Sweeper 120cc Ported/Polished Heads (2) with 2.11 Intake & 1.77 Exhaust Swirl Polished Stainless Steel Valves- $1995.00

1-Edelbrock Carb- 800 CFM Electric Choke-$459.95

1-Replacement Fuel Pump- $89.95

2- Paint-Blue-High Temp- $19.90

1-Water Outlet- 45* New- $44.95

1-Thermostat-180*- Correct for Cadillac- $13.95

1-CHP High Flow Water Pump- $129.95

1-Accel 8mm Plug Wires-Blue- $89.95

1-SFI Flexplate-Dual Pattern- $119.95

16- Lifter, Hydraulic- $50.00

1- Performance Valve Spring Kit-I- $139.95

16-Pushrod- 9.985'- For Use With Shaft Rocker Systems- $111.20

1-VT#10-ST Cadillac Performance Camshaft- $279.95

8-Spark Plug For Iron Head- $47.60

1- Hex Head- Stainless-Full Engine Kit- $79.95

2- Drive Belt- $49.96

2- F Pump Stock Oil Filter- $19.90

1- New Heavy Duty Oil Pump- F-Style-Blueprinted- $189.95

1- Oil Pump Drive Shaft- $64.95

1-Timing Set, Heavy Duty All Steel 3 Piece Set- $49.95

-1- Turn Key Package Discount- -$1250.82

1- Intake Manifold, Edelbrock Performer- $439.00

1-Fiber Intake Gasket Set- $33.95

1-Smog Pump Removal Kit- 1968-1973 For Use With Stock Alternator Bracket- Includes BL80,82,60, HW82 & EP13- $289.00

1-Billet Aluminum Dist Hold Down- $0.01

1-Billet Aluminum Timing Marker- $0.01

1-Small Hex-Grade 8, Stainless-Crank Pulley Kit- $0.01

2-Plug, A.I.R. Cup Plug for Passages in Cylinder Head- $0.01

1-MTS Billet Hub/Balancer ASSY- $299.95

1-A/C Bracket for Use with Aluminum Intake Manifold and SD-508 Style Compressor- $119.95

1-A/C Compressor- SD-508 Style for Use with AF10 Bracket Polished- $259.95

1-Hose Fitting Kit for SD 508 A/C Compressor- $19.95

1-CHP Epoxy E-Core Ignition Coil- $49.95

1-CHP Electronic Billet Dist- Complete Stand-A-Lone Unit. Needs External Coil- $299.95

1-1968-1979 DeVille Headers- $429.95

1-Copper Exhaust Gasket Set- 8 Individual- $49.95

1-Shaft Rocker System. Full Support-1.70 Ratio- $595.00

1-Chrome Valve Cover Kit- Includes Grommets, Stainless Bolts, Breather and Chrome Valve Covers- $109.95

1-Connecting Rod- 6.75' Forged "I" Beam- Pressed Pin- $499.00

1-Cadillac HP Alt- Includes Billet Pulley- $149.95

1-Cadillac HP Keyed P/S Pump- Includes Billet Pulley- $149.95

1-Alternator Pulley- Hard Anodized Aluminum. Larger Diameter with Deeper Groove- $0.01

1-P/S Pulley- Hard Anodized Aluminum. Single Groove. For Use with Keyed Style Pump- $0.01

Air Cleaner-Customer to Supply